KALLER Hose-less BaseplateTM is the increasingly popular easy-accessible alternative to the conventional hosed plate systems on the market.

Kaller Flange Stripper Unit is used in flanging dies for stripping/lifting a flanged part after forming. It provides 200 daN of stripping force, can be top or bottom mounted and is self guiding.

The TL series ranges from model sizes 750 to 5000 with the same features and technology as the TU series.

Using the new DS springs is an excellent way to avoid unnecessary wear of die, press and gas springs.

The Next Generation of Ejector Pin, EP3 16 gas springs are available in both M16 x 1.5 thread sizes and M16 x 2 and EP2 24 gas springs are available in M24 x 1.5 thread size.

Flex Cam, an introduction The Flex Cam is used for piercing, cutting, forming and flanging operations. The system allows for a flexible distribution of forces with optimal direction and velocity. By using a Flex Cam, fewer tools are required in production.

Gas Spring Service & Mantainence - a brochure with a overview of all equipment for Gas Spring Service & Maintenance.

Micro EO24^TM Hose and Tube Systemis our most compact, soft sealed gas linking system.

The TUS series is designed to meet one of the demands facing the metal forming industry today, increasing press speeds.

Brochure on our gas spring that reduces press maintenance, lowers noise levels, and increases production rates.

Soft-hit Striker Plate (SPP) hav been engineered to address three of the major problems that face metal stampers: - Excessive shock loads - High noise levels - Poor part quality

Brochure on Super Compact family (CU), with diameters ranging from 25 mm to 150 mm.

The XG-series are short and our most powerful Piston Rod Sealed gas springs

Our new TX spring are a crossover between our classical TU Spring and our newer X Spring. The TX Spring combines the high forces from the X Spring with the outer dimensions and stroke lengths of the TU Serie.

The Power Line gas springs are a serie available in 1700 N up to 20 000 N forces. These gas springs are our shortest, with more power to give you a great deal of force in a very small amount of space.

The R series get their name from the fact their tube is roll formed and therefore permanently closed, making them non-repairable. R series springs are available with Ø 12, Ø 15, and Ø 19 mm tube diameters and with stroke lengths up to 125 mm. There are 4 colour-coded models

New! R15 Series Introducing a new KALLER Gas Spring, the R15 series. With stroke lengths from 7-125 mm and adjustable force from 18-70 daN. These colour coded Gas Springs are with Ø 15 mm cylinder diameters.

Introducing our smallest KALLER Gas Spring, the R12 series With stroke lengths from 7-125 mm and adjustable force from 6-50 daN. These colour coded Gas Springs are our smallest yet, with Ø 12 mm cylinder diameters.

These new Roller Cam units offer improved performance for off-centre loads, have built in stroke dampening and provide high precision and maintenance free guiding for 30 kN, 50 kN and 150 kN piercing forces.

Kaller controllable springs are a family of gas springs, for use in press tools, that can be locked in their bottom position and where the return stroke of the spring can be controlled.

Selection Guide - a brochure with a Gas Spring Selection Chart for easy guidance.

KALLER Speed Control™ -SPC Gas Springs, these new springs have been engineered to reduce or eliminate blank holder bounce.